Author Topic: Sparx01 build dairy  (Read 45114 times)

ferrari360jd

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 1762
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #45 on: May 22, 2017, 09:28:30 PM »
Last one

Mickey_London

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 1182
  • Karma: +0/-0
    • View Profile
    • Email
Re: Sparx01 build dairy
« Reply #46 on: May 22, 2017, 10:16:47 PM »
And the Ferrari Line continues  ;D
As always top work
I will be looking at the way you've run the filler pipe when I come to get mine, if I can peel myself away from mine haha
Mick

Sparx01

  • Full Member
  • ***
  • Posts: 134
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #47 on: October 04, 2017, 08:44:09 PM »
Hi Guys,

Hopefully JD should be back onto mine now Brillo's is complete and with seeing so many red versions I am now contemplating a different colour.

The colour I am considering is, Ferrari Blu Abu Dhabi and was then thinking of carbon fibre (hydro graphic) door mirrors etc..

Any thoughts.

Cheers, Tone

ferrari360jd

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 1762
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #48 on: January 13, 2018, 09:46:05 AM »
Hi Sparks , guys , well now Chris's 355 is finished and gone and I'm not taking any more day to day work on I can now concentrate on the last couple of cars ,
So time for an update .
I finished the bulkhead behind the drivers seat then covered this in black carpet to match the new seats ,
Next I fitted the bulkhead window ,then totally sealed it all in which means no fumes also means I can leave the top of the exhaust showing which will look so cool with the fake engine ,
Next up was to fit the 2 genuine ferrari engine bay side panels these really finish the engine bay off .
Also fitted the boot and bonnet catches ( just as well I had a spare car for all the little bits that were missing )
Then I fitted the seat belts and made and fitted the seat frames for the new seats ,
Here's a few pics for now cheers jd

ferrari360jd

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 1762
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #49 on: January 13, 2018, 09:49:41 AM »
The new seats fitted And one of the engine bay , not sure why the are coming out distorted .

Mickey_London

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 1182
  • Karma: +0/-0
    • View Profile
    • Email
Re: Sparx01 build dairy
« Reply #50 on: January 13, 2018, 06:09:43 PM »
I thought everyone was hibernating haha
Good to see the progress
No rest for some haha
Mick

ferrari360jd

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 1762
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #51 on: January 20, 2018, 05:07:15 PM »
Hi tone , guys , here's another update , first iv fitted all the cables for the bonnet ,boot and petrol catches, all working great now , then iv fitted the washer bottle and washer pump off the spare car, we now hav washers ,
So with a few more little jobs off my List it was time to start on the Audi window conversion so started on the drivers side , iv got the Audi frame all cut to size ,the pug door all trimmed and bolted the Audi frame in place ,next it was time to fit the mock up window ( a spare  scratched one I use ) into the frame and check it all fits ok which after doing so many now it does lol , ok then it was time to alter the roof lip so the door window rubber fits perfectly into place. So iv just got to dress it all up then fab the bracket for The altered  window motor and test it all goes up and down ok that's next weeks job , here's a couple of pics for now cheers jd

ferrari360jd

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 1762
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #52 on: January 20, 2018, 05:09:17 PM »
A couple of the frame and window bolted in place

Sparx01

  • Full Member
  • ***
  • Posts: 134
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #53 on: January 20, 2018, 09:07:23 PM »
Cheers JD.

I'm lovin it, lovin it lovin it. 

Tone

4u2nv

  • Hero Member
  • *****
  • Posts: 914
  • Karma: +0/-0
  • Going going gone !!
    • View Profile
Re: Sparx01 build dairy
« Reply #54 on: January 21, 2018, 10:49:10 AM »
Nice work JD :) 

Sparx01

  • Full Member
  • ***
  • Posts: 134
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #55 on: January 27, 2018, 12:13:07 AM »
Hi Guys,

We've popped over to Cardiff this weekend to see the sister-in-law and the next door neighbour has only gone and parked is Ferrari 812 in the street. It was dark when we got here, so will try and get a pic or two in the daylight. I have a feeling it is in the Abu Dhabi Blu that I have been considering, so this may make my mind up.

Tone

ferrari360jd

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 1762
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #56 on: January 27, 2018, 09:38:03 AM »
Hi tone ,guys ok update time ,I finished trimming the inner door skin panel then welded some lugs onto it so that can be bolted in and out as this needs to be removed if you ever need to change a window glass , once that was completed I made and fitted the brackets to attach the modified door card back on  so that's the drivers side complete here's a pick cheers jd .

Sparx01

  • Full Member
  • ***
  • Posts: 134
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #57 on: January 27, 2018, 03:57:42 PM »
Cheers JD another great job.

Tone

4u2nv

  • Hero Member
  • *****
  • Posts: 914
  • Karma: +0/-0
  • Going going gone !!
    • View Profile
Re: Sparx01 build dairy
« Reply #58 on: January 29, 2018, 08:51:06 PM »
Great work :)

ferrari360jd

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 1762
  • Karma: +0/-0
    • View Profile
Re: Sparx01 build dairy
« Reply #59 on: February 02, 2018, 06:41:08 PM »
Hi tone , guys. Well another good week , pasenger side window all fitted and working as it should , and the brackets made and fitted for the inner door card , I'll not bore you with a load of repeat pics so here's the finished job cheers jd

 

Advert