Extreme Cars Owners Club - Kitcar UK DADS360 - THE Build diary!
* * * * * * * * *
Aa_New_Damage
Extreme Owners Club
Advanced Search
February 16, 2019, 10:29:10 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Welcome to the Forums
Pages: 1 2 3 [4] 5
Topic Tools  
Read August 22, 2018, 12:25:59 PM #45
dads360

Re: DADS360 - THE Build diary!

Further news on the drivers door. Photo's of the Ferrari door handle mounted on the Peugeot door skin on the mounting bracket I made. This was not without it's challenge since I had to work out the shape with the outer extreme skin in place. The handle and mount are fitted from the outside, I have done it this way so should the handle ever need replacing the outer fibre glass skin does not need to be removed. The door actuator extends into the Peugeot door so cable replacement would not require the skin to be removed either. 


* IMG_20180820_172904.gif (445.27 KB, 540x960 - viewed 350 times.)

* IMG_20180820_172914.gif (436.14 KB, 540x960 - viewed 346 times.)

* IMG_20180820_172924.gif (438.42 KB, 540x960 - viewed 352 times.)

* IMG_20180820_173043.gif (418.69 KB, 540x960 - viewed 347 times.)

* IMG_20180820_173101.gif (362.33 KB, 540x960 - viewed 345 times.)

* IMG_20180822_100658.gif (275.04 KB, 540x960 - viewed 346 times.)

* IMG_20180822_100726.gif (293.77 KB, 540x960 - viewed 347 times.)
 
Read August 22, 2018, 03:00:08 PM #46
360brian

Re: DADS360 - THE Build diary!

its a pleasure to see such great engineering!
 
Read November 06, 2018, 01:56:07 AM #47
dman1409

Re: DADS360 - THE Build diary!

looks great to see you use oem levers... i have them also, along with motors inner door levers etc... are you going to use them also?
 
Read November 06, 2018, 01:38:26 PM #48
dads360

Re: DADS360 - THE Build diary!

Hi, I have only used the OE outer handle, linked by cable to the Pug door lock. I will be posting some photo's soon.
 
Read November 21, 2018, 08:35:26 PM #49
4u2nv

Re: DADS360 - THE Build diary!

Wow this is epic work . Looks stunning .

Got some real skill there Smiley
 
Read November 21, 2018, 08:38:51 PM #50
dads360

Re: DADS360 - THE Build diary!

Shots of the door card, inner and outer. The inner shot shows the two additional towers made to locate the attachment pins. The location of the operating servo is shown on the shot of the inside of the metal door panel . The photo of the Audi window lift gear box shows the Peugeot gear drive modded and mounted .


* casette.jpg (285.47 KB, 960x540 - viewed 232 times.)

* Door Card - 2.jpg (252.87 KB, 960x540 - viewed 235 times.)

* Window Motor.jpg (246.74 KB, 540x960 - viewed 233 times.)

* lifter.jpg (319.28 KB, 540x960 - viewed 230 times.)

* inner.jpg (282.39 KB, 540x960 - viewed 234 times.)
 
Read November 21, 2018, 09:50:17 PM #51
zxrjohn14

Re: DADS360 - THE Build diary!

What have you used as the spline adaptor?
 
Read November 22, 2018, 10:39:15 AM #52
dads360

Re: DADS360 - THE Build diary!

Hi ZXRJohn,
The mod to the lift mechanism is really simple, no adapters required. The drive gear from the Peugeot lift motor is removed, it looks like two gears one on top of the other. Carefully grind down the teeth on a bench grinder the larger gear off the two. Although the spline count is different , the Peugeot is coarse, the Audi fine. Keep carefully grinding until the gear starts to engage in the Audi splines. Now come the the magic, the Audi housing has a 6mm hole in the back of the housing .Put a 6mm bolt in the vice that is long enough to pass through the Audi housing and the Peugeot drive gear and space for a nut. Then get the gear red hot, drop it on to the bolt quickly put on the nut and then tighten the nut with a fully charged powerful cordless drill. Once fully seated cool the gear with water.
I know it sounds long winded but it worked for me.
 
Read November 22, 2018, 06:33:22 PM #53
zxrjohn14

Re: DADS360 - THE Build diary!

Thank you for that.
It makes perfect sense and I'll give it a go.
I've already robbed one of your ideas and put angle iron behind the front of the rear quarters  Smiley
 
Read November 22, 2018, 09:41:01 PM #54
4u2nv

Re: DADS360 - THE Build diary!

Hi ya I love this build , can ask what's rad are you using ? Also are you also running a separate water pump at the front also ?

Cheers
Chris
 
Read November 23, 2018, 01:23:52 PM #55
dads360

Re: DADS360 - THE Build diary!

Hi 4u2nv, the rad I am using is from a lotus esprit V8. See photo. The water pump is  gear driven Chevrolet high volume unit, the engine has idled for several hours without over heating. the car has consumed ten gallons of fuel and not moved an inch !.


* rad.jpg (217.93 KB, 640x480 - viewed 210 times.)
 
Read November 23, 2018, 09:40:58 PM #56
4u2nv

Re: DADS360 - THE Build diary!

That's great Smiley  thanks for the info .

Love this build.  Really top notch .
 
Read December 23, 2018, 06:21:56 PM #57
dads360

Re: DADS360 - THE Build diary!

Not done much lately, got distracted by MOTing four cars in the family. Then having taking up half the driveway to repair a blocked foul sewer. Along with not being able to access my man cave until the wasp man had got rid of the nest along with all the little darlings. I am still sporting a number of stings. So i got back to it and decided to do the drivers door mirror. I looked high and low for the fibre glass triangles supplied by Extreme, but could not find them any where ,so decided to make one in steel. A morning later it's job done only.............. to find the Extreme piece.
Merry Christmas and happy new yer everyone, lets keep going it in 2019.


* mirror mount 2.jpg (32.06 KB, 135x240 - viewed 162 times.)

* mirror mount 1.jpg (204.83 KB, 540x960 - viewed 156 times.)
 
Read January 08, 2019, 03:46:10 PM #58
dads360

Re: DADS360 - THE Build diary!

I found a lost file with some build photos on. The little guy shown with the engine is now ten years old !. I thought I should share them with you guys


* Door Card - 1.jpg (1554.59 KB, 2560x1920 - viewed 74 times.)

* engine4.gif (228.98 KB, 691x453 - viewed 73 times.)

* dadcigar.gif (397.18 KB, 851x768 - viewed 71 times.)

* fronthub.gif (441.63 KB, 768x825 - viewed 71 times.)

* gearbox.gif (201.51 KB, 614x461 - viewed 70 times.)

* mock-up.gif (217.31 KB, 640x480 - viewed 70 times.)

* rearchassis.gif (265.74 KB, 768x576 - viewed 70 times.)

* zachtinkering.gif (193.71 KB, 614x461 - viewed 71 times.)
 
Read January 08, 2019, 08:23:45 PM #59
dads360

Re: DADS360 - THE Build diary!

Found some shots of the exhaust mounted on the trans axle. This is the same as the O/E 360.


* exhaust-mounted.gif (17.33 KB, 160x120 - viewed 61 times.)

* exhust-mount.gif (188.42 KB, 640x480 - viewed 57 times.)

* centretunnel.gif (241.87 KB, 691x518 - viewed 56 times.)

* steeringbox.gif (278.42 KB, 768x576 - viewed 57 times.)
 
Pages: 1 2 3 [4] 5
Jump to:  

Advert

Theme by Webtechnica.net
MySQL PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
SMFAds for Free Forums
XHTML 1.0 CSS