Hi Simon ,guys , ok with the dash done it was time to start the cockpit bulkhead , Simon managed to get an original Oem window so I bonded it into the extreme bulk and fitted that securely in place , then I made the lower frame and welded that in place , next was to make some panels up and seal it all in place , that just leaves the window surround parts to fit and seal , ok so while that was all drying I repositioned the battery so it would clear the Oem engine frame Simon required, I rested the engine frame in place in accordance with the Oem engine side panels to see how it looks and it will look sweet , ok some pics f,or now cheers jd