Extreme Owners Club
Extreme Kits => Extreme 360 => 360 Build Tips and Advice => Topic started by: zxrjohn14 on December 21, 2018, 05:32:23 PM
-
What's the best way to eliminate the light on in the dash?
I'm not keen on just wiring it up to the oil light.
Any tips or advice?
-
Check the sensors at the wheels
They may just be grudded up. Bit of a clean up may sort it.
Mick
-
Bahahaha. God knows why I put abs, I meant srs as in the air bags, my bad.
-
Have you replaced your steering wheel or your seats yet
Mick
-
http://extremeoc.co.uk/index.php?topic=2636.msg27491#msg27491 (http://extremeoc.co.uk/index.php?topic=2636.msg27491#msg27491)
I ended up using 2.2 ohm resistors in the end, as the light came back on with the 3.3 ohm resistors
Hope this helps
Mick
-
Thank you for that, Mick, i'll give it a go
Yes, i've replaced the steering wheel and the seats are out, so all wiring is exposed currently, hence why i thought i'd get it sorted
Thanks again
:) :)
-
Hi John,
Think i might have just taken the bulb out :)
Alex360