Extreme Owners Club

Extreme Kits => Extreme Murcie => Topic started by: CdRsKuLL on March 15, 2020, 10:10:50 AM

Title: Headlight rings - 3D Printed
Post by: CdRsKuLL on March 15, 2020, 10:10:50 AM
Times move on a little and with 3D printing becoming mainstream I designed up some headlight rings for the Murcie. 

https://www.thingiverse.com/thing:3938685

I've uploaded the design to thingiverse so you can print your own but if you don't have a printer then I would be more than happy to print a set out and post it for say £25

Infact, if you want anything designing / printing then let me know. I have about 16 printers at the moment...

Steve
Title: Re: Headlight rings - 3D Printed
Post by: AIG1355 on March 15, 2020, 12:17:57 PM
Hi Steve, do you think you would be able to print a kind of F355 ashtray to fit in a space I have in the centre console?  A box with hinged lid. I have a crossed flags badge that I was going to bolt directly into the area, but would look better maybe on a replica ashtray lid. It's quite shallow though and it isn't the same size as a genuine ashtray. Rich.
Title: Re: Headlight rings - 3D Printed
Post by: CdRsKuLL on March 15, 2020, 02:16:12 PM
We can give it a go...  Can you do a fag packet drawing of what you require and we can take it from there.
Title: Re: Headlight rings - 3D Printed
Post by: AIG1355 on March 15, 2020, 10:02:20 PM
Will do, the car is in the bodyshop at the moment, so when I get a chance I"ll get some measurements. Cheers
Title: Re: Headlight rings - 3D Printed
Post by: mikemurci on March 16, 2020, 07:44:22 PM
Times move on a little and with 3D printing becoming mainstream I designed up some headlight rings for the Murcie. 

https://www.thingiverse.com/thing:3938685

I've uploaded the design to thingiverse so you can print your own but if you don't have a printer then I would be more than happy to print a set out and post it for say £25

Infact, if you want anything designing / printing then let me know. I have about 16 printers at the moment...

Steve


i would love a set. do you do them in silver?   Or can you two tone :)
Title: Re: Headlight rings - 3D Printed
Post by: CdRsKuLL on March 16, 2020, 07:47:03 PM
Hey,

I do have silver but I would advise sanding / painting them to be honest. I can also print in dual (and even four) colour if needed :-) 
Title: Re: Headlight rings - 3D Printed
Post by: ChristiaanN on April 13, 2020, 09:05:00 PM
Times move on a little and with 3D printing becoming mainstream I designed up some headlight rings for the Murcie. 

https://www.thingiverse.com/thing:3938685

I've uploaded the design to thingiverse so you can print your own but if you don't have a printer then I would be more than happy to print a set out and post it for say £25

Infact, if you want anything designing / printing then let me know. I have about 16 printers at the moment...

Steve

noice!
Title: Re: Headlight rings - 3D Printed
Post by: mikemurci on May 13, 2020, 11:15:06 PM
Times move on a little and with 3D printing becoming mainstream I designed up some headlight rings for the Murcie. 

https://www.thingiverse.com/thing:3938685

I've uploaded the design to thingiverse so you can print your own but if you don't have a printer then I would be more than happy to print a set out and post it for say £25

Infact, if you want anything designing / printing then let me know. I have about 16 printers at the moment...

Steve


im up for a set please
Title: Re: Headlight rings - 3D Printed
Post by: CdRsKuLL on May 14, 2020, 08:42:50 AM
Morning,

No problem, I can print and post them today for you.  I'll send you over a PM now.

Thanks,

Steve