Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - pug360

Pages: [1]
1
Buy and Sell Forum / 360 for sale lovely example
« on: March 31, 2019, 10:51:07 PM »
hi guys ,
I'm looking to maybe sell my 360 , car is on english plates and is currently located in ireland (delivery to ferry may be possible)
its built on a 98 3.0v6 with 86k miles
car has full ferrari engine mock up in the rear , lots of genuine parts, full leather interior
paint is in lovely condition , all gaps etc. are very good
offers welcome , pm if you require any other info
cheers

2
Extreme 360 / my 360 finally finished
« on: October 12, 2015, 10:45:13 AM »
hi all , well after covering up the car for 2 years I finally got the kick I needed to finish it off , my mate got married and wanted the 2 cars there (he has a 355 rep.

I wasn't really ready for the response and attention the car gets , its unreal!

anyway a small run down on the car , its a 3.0 v6 with 60mm stainless exhaust , decat and 1 silencer , sounds great
I cut /raised the wheel valances for extra clearance , the car is on kw coilovers with modified drop links, running 20" wheels.
it has a replica engine with genuine plenium and manifold , airbox etc. I made my own side panels and bulkhead.
I fitted the boot lid with the extra brake light , and fitted genuine badges and wing shields .

I live in Ireland and here the roads are terrible, so I am currently working on air to get the car lower while static. as it sits it bottoms out occasionally
but has an ok ride height. I reckon its the stance and wheel fitment that gives away most replicas.

the interior still needs finishing touches but overall I am happy how it turned out.(bar fitting a genuine dash)

anyway enjoy,

3
Extreme 360 / few pics of my almost finished 360
« on: April 17, 2012, 12:27:11 PM »
hi all , i have been working away on this on and off for a while now, nearly there

 said id stick up a few pics to see what ye think

the engine inlet /manifold and airboxes are off real car , made up the frame and side panels m

4
Extreme 360 / ecu plug question
« on: January 05, 2009, 08:38:22 PM »
hi all , am in the process of building a 360 and need to get my car started , hoping someone on here can help me out
i removed the box which houses the ecu during the cutting process
im not sure but i think i might be missing a piece, there are 4 wiring sections entering the box
1 for the ecu, 2 black plug in units with slider to hold secure
and a 4 wire plug with 4 pins
is there anything that plugs into this??
any help would be greatly appreciated
ps. forgot to say its a 98 3.0v6
thanks guys

Pages: [1]