Today I plan to remove the rear quarter windows, door
cards, door windows and headlining.
Firstly, remove the seat belt securing nut. to do this
just pull off the adjuster handle with a tug....
This reveals the screw that secures the plastic cover
Plastic cover removed, the seat belt can now be
unbolted
Now remove the adjuster slider metal by removing the 2 bolts.
This now reveals the 2 bolts that hold the rear quarter window on...
Remove these using a magnet to catch them, after this, the windows just comes off when the catch is removed
Door cards next..Remove this bolt
Then pull off the door handle surround
Remove this plug....
then remove this bolt...
and this one, then "pop" the door card off, then remove the inner rain shield from the door
You need to remove this bolt to remove the outer door trim, this then reveals a hole so that you can now remove the two glass rear securing bolts, after that remove the two glass front securing bolts from inside the door, you can now remove the glass.
Then remove the passenger handle, coat hooks, interior lights and then the sun visors. A big tip, the two connectors on the left are for the visors, if you unplug these you will then be able to remove the sun visors without cutting the wires like I did :-(
Then remove the headlining....
I also then removed all the wiring and wire securing clips from the A pillars and the roof.
Thought I would just hang the door on like everyone does!! :-)
Thats it for today......