Hi guys! Another good score today!! I got all the OEM internal door parts like the guide rails for the side glass, cable loom, oem doorlock, oem door hinges, inner rubbers, red door lights etc. I also got the motors an inner door hinges!
I needed these parts befor i can start my build, because the most important part of my build evolves around the glass. The last parts i need for the door are the outer rubbers, the large inner door rubber and the door cards...
After i have the A and B pilars (tacked) in place i need to adjust the curve of the A pillar and reposition the B post to the correct spot. In order to determine the correct roof line i wil use the oem window strip that i lay on top of the oem quarter glass and then place it on the quarter. Below is a picture of what i mean.
As you can see, the bottom part of the quarte matches the shape of the oem quarter glass, the top part matches the roofline of the pug, which is more rounded. I will have to adjust the quarter panel as well as the A-pillar to get the correct shape.
What do you guys think of the route that i'm taking?
Cheers!