Author Topic: DADS360 - THE Build diary!  (Read 16573 times)

dads360

  • Extreme Owner
  • Full Member
  • *
  • Posts: 119
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #30 on: June 30, 2018, 12:03:19 PM »
Managed to get the front compartment finished.

dads360

  • Extreme Owner
  • Full Member
  • *
  • Posts: 119
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #31 on: June 30, 2018, 12:06:22 PM »
Couple of shots of the interior .

dads360

  • Extreme Owner
  • Full Member
  • *
  • Posts: 119
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #32 on: July 17, 2018, 05:29:03 PM »
Restarted work on the drivers door. Fitted the OE door handle, and mounted the internal collision bar on the outer skin on the door [photo to follow]. 

dads360

  • Extreme Owner
  • Full Member
  • *
  • Posts: 119
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #33 on: July 24, 2018, 08:19:20 PM »
Photo's of the door bar taken from the inside of the Peugeot door, this has been modified and will be bonded and bolted to the ouside of the door under the Ectreme door skin. Also a couple of shots of the door handles which work by cable to the lock itself.

dads360

  • Extreme Owner
  • Full Member
  • *
  • Posts: 119
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #34 on: July 25, 2018, 08:48:58 PM »
I got around to organising the gear lever gate to go on the centre console only to realise the gear lever I made years ago was the wrong diameter 12mm should have been 10mm and was also too short. So had to make another this time 10mm 304 stainless steel along with an o/e knob. It's all part of the learning curve.

dads360

  • Extreme Owner
  • Full Member
  • *
  • Posts: 119
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #35 on: July 31, 2018, 07:49:18 PM »
Thought I would share a couple of photo's of the fuel system. I have isolated the ferrari intank high pressure fuel pump and pressure regulator. They run @ 65 PSI far to high when feeding the holley carb I will be running when the car is first running. I have installed in the tanks fuel pumps from a 7 litre Buick Riviera feeding a Holley fuel pressure regulator set @ 4 PSI.

360brian

  • Full Member
  • ***
  • Posts: 221
  • Karma: +0/-0
    • View Profile
Re: DADS360 - THE Build diary!
« Reply #36 on: August 01, 2018, 11:22:56 AM »
Thought I would share a couple of photo's of the fuel system. I have isolated the ferrari intank high pressure fuel pump and pressure regulator. They run @ 65 PSI far to high when feeding the holley carb I will be running when the car is first running. I have installed in the tanks fuel pumps from a 7 litre Buick Riviera feeding a Holley fuel pressure regulator set @ 4 PSI.

this is a epic build, great to follow. Are you in the UK? would be great to see this coming together and compare notes (nb, I don't work for Ferrari or their connected companies).

peggyontherun

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 718
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #37 on: August 01, 2018, 06:11:06 PM »
Would you sell the gear lever that your not going to use email me on peggy390521@gmail.com as I don't have pm on here if admin can confirm why ?? Cheers
I Live my life a quater miles at a time.Nothing else matters Not the Morgage not the store not my team and all there bull****.For those ten seconds or less i'm free - Don Fast & Furious

dads360

  • Extreme Owner
  • Full Member
  • *
  • Posts: 119
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #38 on: August 05, 2018, 06:25:40 PM »
Hi brian 355, I am base in the UK up in West Yorkshire.
Peggyintherun I have sent you a pm.

dads360

  • Extreme Owner
  • Full Member
  • *
  • Posts: 119
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #39 on: August 07, 2018, 01:00:14 PM »
shots of the door bar in place, the nearside fuel tank and air intake trunkingalong with the interior panels to go inside the rear quarter light glass.

peggyontherun

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 718
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #40 on: August 08, 2018, 11:05:50 AM »
Email sent
I Live my life a quater miles at a time.Nothing else matters Not the Morgage not the store not my team and all there bull****.For those ten seconds or less i'm free - Don Fast & Furious

dads360

  • Extreme Owner
  • Full Member
  • *
  • Posts: 119
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #41 on: August 15, 2018, 12:11:23 AM »
Update on the drivers door. Photos of the end cap in place. Couple of shots of the B post, I ended up cutting the fibre glass return off the quarter panel, it was so thick that the door rubber would not go over it.

ferrari360jd

  • Extreme Owner
  • Hero Member
  • *
  • Posts: 1760
  • Karma: +0/-0
    • View Profile
Re: DADS360 - THE Build diary!
« Reply #42 on: August 15, 2018, 06:00:52 PM »
Great work as allways Steve , she is coming together slowly but surely  :)

dads360

  • Extreme Owner
  • Full Member
  • *
  • Posts: 119
  • Karma: +0/-0
    • View Profile
    • Email
Re: DADS360 - THE Build diary!
« Reply #43 on: August 15, 2018, 06:06:47 PM »
Hi John, thanks for the comments, now the weather has cooled down I am back at it. Would it be possible for you to send me a PM ?.

zxrjohn14

  • Jr. Member
  • **
  • Posts: 90
  • Karma: +0/-0
    • View Profile
Re: DADS360 - THE Build diary!
« Reply #44 on: August 15, 2018, 09:35:54 PM »
Beautiful project. Some excellent ideas and work.
Loving the idea of the extra metal for the quarter panel on the B post.

 

Advert